Belden 9913F7 Cable (introduced 2nd Quarter 2000)

Belden 9913F7 is a flexible RG-8/U type 50 ohm transmission cable with a black Belflex jacket and a high density foam dielectric. Because of this cables flexibility (6 inch bending radius) it is ideal for any application where there is a lot of cable movement (ie. rotator loops and tight bends around corners). The cable is double shielded (1st layer - 100% duobond II and the 2nd layer is 90% tinned copper braid) and has a 10 AWG bare copper 7-stranded center conductor. It has a velocity factor of 84%.

This cable's power handling and attenuation characteristics are as follows:

Frequency (MHz) Attenuation (db per 100 ft) Power Handling (Watts)
1 .2 9,200
10 .6 2,800
50 1.1 1,700
100 1.5 800
200 2.0 500
400 2.8 290
700 3.9 200
900 4.4 190
1000 4.8 175
4000 11.0 65

For current pricing, go here. Additionally The RF Connection carries a full line of connectors for this cable. For more information on the cable or to place an order please call Joel at 1-800-783-2666 or (301) 840-5477. You can also fax us at (301) 869-3680.


Send mail to rfc@therfc.com.

RF Connection Ordering Policy

Go to The RF Connection home page.

Last modified 2013.
Copyright 2006-2013 The RF Connection.